phpList Resources - system:config

access_control_allow_origin

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:01:43+00:00

You may need to set this to something else, if you want to be able to Ajax requests to phpList.

access_control_allow_origins

Anonymous (anonymous@undisclosed.example.com) — 2021-10-17T11:29:20+00:00

add_email_throttle

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:41:02+00:00

When sending a test, if the address used for sending the test to does not exist, there is a little “Add” button, to allow easy adding to the database. This value limits the use of this function. It is the number of seconds that have to be between the add requests.

admin_auth_module

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T21:56:13+00:00

admin_protocol

Anonymous (anonymous@undisclosed.example.com) — 2016-03-14T22:12:46+00:00

admin_wwwroot

Anonymous (anonymous@undisclosed.example.com) — 2023-07-27T12:33:16+00:00

This setting allows you to fix the location of the admin pages. This is particularly useful when in a proxying environment like Docker. Normally phpList will try to figure out where it is location from the server environment, but this setting will take precedence.

all

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:47:28+00:00

All config file options Constants and variables

allowed_referrers

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:59:43+00:00

Example $allowed_referrers = array('www.phplist.com','demo.phplist.com'); See also check_referrer

allow_attachments

Anonymous (anonymous@undisclosed.example.com) — 2019-05-27T08:59:49+00:00

allow_deletebounce

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:27:38+00:00

allow_import

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:45:40+00:00

allow_non_list_subscribe

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T17:33:56+00:00

When set to true, a subscriber is not forced to choose a list when subscribing. They will still be added to the database and will require confirmation as usual.

allow_updater

Anonymous (anonymous@undisclosed.example.com) — 2019-03-15T14:49:03+00:00

always_add_usertrack

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:01:39+00:00

Before 3.0 you had to enter [USERTRACK] in the campaign to make sure that opens were tracked. This setting will always add it, even if it is not in the campaign.

askforpassword

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T23:54:21+00:00

async_request_interval

Anonymous (anonymous@undisclosed.example.com) — 2023-04-10T19:27:52+00:00

In some pages (eg the subscriber list page), certain elements of the page are fetched in the background. This may at times cause the server to think it is being attacked when many requests are fired in a short space of time. Set this value (in milliseconds, so 2000 is two seconds) to create a small delay between the requests, so that the server is happy.

attachment_repository

Anonymous (anonymous@undisclosed.example.com) — 2013-08-22T11:32:01+00:00

attributevalue_reorder_limit

Anonymous (anonymous@undisclosed.example.com) — 2015-08-13T16:49:42+00:00

See also When the amount of values for an attribute (select, radiobutton, etc) is more than this value, you will not be able to edit the order any longer.

aws_accesskeyid

Anonymous (anonymous@undisclosed.example.com) — 2013-09-16T19:26:23+00:00

aws_posturl

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:10:38+00:00

aws_secretkey

Anonymous (anonymous@undisclosed.example.com) — 2013-09-16T19:25:51+00:00

blacklist_email_on_bounce

Anonymous (anonymous@undisclosed.example.com) — 2016-03-26T12:36:05+00:00

The setting bounce_unsubscribe_threshold will mark a subscriber unconfirmed at a certain threshold. This setting will additionally mark the subscriber blacklisted.

blacklist_gracetime

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:01:38+00:00

block_pasted_clicktracklinks

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:58:18+00:00

When phpList detects that the editor has pasted URLs with the click tracking code in them back in the editor, it will give a warning. This option will also disallow placing such a campaign in the queue.

bounce_mailbox_purge

Anonymous (anonymous@undisclosed.example.com) — 2013-08-29T13:39:40+00:00

bounce_mailbox_purge_unprocessed

Anonymous (anonymous@undisclosed.example.com) — 2013-08-29T13:41:35+00:00

It is best to set this to true. The bounce will be added to the phpList database, so you can view it in the phpList admin pages.

bounce_protocol

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:02:36+00:00

bounce_unsubscribe_threshold

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:04:10+00:00

check_for_host

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:06:24+00:00

This will add a little delay in the subscription process, as the domain needs to be looked up using the DNS system. You may also need to verify that resolving DNS works on your phpList server.

check_referrer

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:23:33+00:00

This is a small check on validity of a request and will not protect completely. But it won't hurt either. In order to allow referrers you know, you can use allowed_referrers If you continuously get “Access denied” when using phpList, you will want to switch this off.

check_sessionip

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T16:43:25+00:00

clicktrack

Anonymous (anonymous@undisclosed.example.com) — 2017-01-16T13:40:30+00:00

clicktrack_linkmap

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:59:45+00:00

clicktrack_showdetail

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:30:22+00:00

This used to exist in pre-3.0 versions, but is no longer in use.

constants

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T23:14:50+00:00

database_connection_compression

Anonymous (anonymous@undisclosed.example.com) — 2013-09-09T12:52:07+00:00

database_connection_ssl

Anonymous (anonymous@undisclosed.example.com) — 2013-09-09T12:51:09+00:00

database_module

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:07:52+00:00

Currently only mysql.inc is available.

date_end_year

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:44:51+00:00

Value 0 means that the current year + 10 will be used as the final year.

date_start_year

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:42:49+00:00

db_translation

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T23:54:57+00:00

default_messageage

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:38:47+00:00

When creating a new campaign, this will set the value for “Stop sending after”. The default 604800 is one week.

default_mimetype

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T17:18:36+00:00

When the mime-type was not found in MIMETYPES_FILE

default_system_language

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:12:31+00:00

When using the web interface, the language will be set to what the administrator chooses it to be. And on the first access to the admin pages, this will be chosen from the settings of the browser of the administrator. But on commandline this information is not available, and this setting will be used instead.

devsite

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T23:55:27+00:00

domain_auto_throttle

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:38:13+00:00

See also USE_DOMAIN_THROTTLE, DOMAIN_BATCH_SIZE, DOMAIN_BATCH_PERIOD, DOMAIN_AUTO_THROTTLE

domain_batch_period

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:37:18+00:00

See also USE_DOMAIN_THROTTLE, DOMAIN_BATCH_SIZE, DOMAIN_AUTO_THROTTLE

domain_batch_size

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:35:30+00:00

See also USE_DOMAIN_THROTTLE, DOMAIN_BATCH_PERIOD, DOMAIN_AUTO_THROTTLE

emailtextcredits

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T23:56:11+00:00

email_address_validation_level

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T21:50:50+00:00

Levels are: 0 - no validation, although some really basic validation is still done 1 - simple validation 2 - RFC821 email validation without escaping and quoting of local part 3 - RFC821 email validation

embedexternalimages

Anonymous (anonymous@undisclosed.example.com) — 2016-02-01T12:27:48+00:00

This option is experimental (Feb 2016). Please use it and report your findings.

embeduploadimages

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:51:56+00:00

This option will potentially make the messages very large, so use with care. In general it will be better to leave images on a server, because then they are only requested when needed, saving a lot of bandwidth.

empty_value_prefix

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:48:50+00:00

Using this, you can organise your attribute values to have some useful “empty” values. For example for your subscribers to set their country, you can put -- Select your country as the first country, which then returns an empty value when chosen. If you then make

encryption_algo

Anonymous (anonymous@undisclosed.example.com) — 2017-01-21T21:42:20+00:00

Once you have this set, be careful to change it, as you may lock yourself out from your phpList installation. You may still be able to use the “Forgot password” functionality to get back in. If you upgraded from older versions of phpList, you may want to set this to

encrypt_admin_passwords

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:10:29+00:00

This setting is obsolete. Passwords (even subscriber passwords) are always encrypted. See also ENCRYPTION_ALGO

error404page

Anonymous (anonymous@undisclosed.example.com) — 2014-08-12T22:37:21+00:00

Set this to a file that can be found in the webroot of the site that phpList runs on. If this file exists, it will be used instead of the default File-Not-Found to display when a link is used that is incorrect.

export_excel

Anonymous (anonymous@undisclosed.example.com) — 2019-08-09T16:26:05+00:00

Changes the default delimiter used for CSV fields from tab, to comma, for better compatibility with Microsoft Excel

export_mimetype

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:44:15+00:00

fckimages_dir

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T23:57:20+00:00

No longer in use, use UPLOADIMAGES_DIR instead.

filesystem_attachments

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T16:45:33+00:00

forward_alternative_content

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T21:41:25+00:00

forward_email_count

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T21:37:25+00:00

forward_email_period

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T21:38:32+00:00

A subscriber is allowed to forward FORWARD_EMAIL_COUNT in FORWARD_EMAIL_PERIOD See also mySQL INTERVAL value, FORWARD_EMAIL_COUNT

forward_personal_note_size

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T21:37:41+00:00

hash_algo

Anonymous (anonymous@undisclosed.example.com) — 2017-01-21T21:41:43+00:00

This was renamed from ENCRYPTION_ALGO in version 3.3.0 Once you have this set, be careful to change it, as you may lock yourself out from your phpList installation. You may still be able to use the “Forgot password” functionality to get back in. If you upgraded from older versions of phpList, you may want to set this to

htmlemail_encoding

Anonymous (anonymous@undisclosed.example.com) — 2016-03-02T19:37:42+00:00

If you are using Microsoft Exchange Server as your delivery MTA, you will probably want to set this to “8bit”, as was discussed in this mantis issue.

import_filesize

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T21:40:15+00:00

installation_name

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:45:26+00:00

keepforwarderattributes

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T21:42:41+00:00

language_auto_update

Anonymous (anonymous@undisclosed.example.com) — 2013-10-07T20:26:57+00:00

language_module

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:46:51+00:00

language_switch

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:39:49+00:00

mailqueue_autothrottle

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:12:26+00:00

When enabled, phpList will try to make sure that MAILQUEUE_BATCH_SIZE are send evenly in MAILQUEUE_BATCH_PERIOD and adjust the delay between messages to make that happen.

mailqueue_batch_period

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:06:12+00:00

The number of seconds for a batch, when using batch processing

mailqueue_batch_size

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:04:55+00:00

The size of a batch when processing the queue. A value of 0 means, do not use batch processing and send as fast as possible.

mailqueue_throttle

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:09:04+00:00

This is the number of seconds to wait between two messages. You can also use fractions eg 0.5 to wait half a second.

manually_process_bounces

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:08:22+00:00

Similar to MANUALLY_PROCESS_QUEUE. When false/off you need to process bounces with the commandline as the link will disappear from the admnin interface.

manually_process_queue

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T23:58:01+00:00

If this is set to false or 0, the link to send the queue will disappear from the admin interface. In that case, you will need to make sure to set up commandline queue processing

maxlist

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:18:06+00:00

max_avatar_size

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:33:43+00:00

Not actually in use.

max_msg_pp

Anonymous (anonymous@undisclosed.example.com) — 2017-02-14T21:57:03+00:00

This value is used to set the maximum per page for a listing of campaigs. If there are more results, they will be listed in a subsequent page. View code See also MAX_USER_PP

max_processqueue_time

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:45:14+00:00

Even if the time allowed is small, it will always send at least one message.

max_process_message

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:26:42+00:00

Even if you have say 100s of campaigns queued, this setting will get phpList to work on only the first few (default 5) and only continue with the rest when the first few have been sent completely.

max_sendprocesses

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:55:24+00:00

Setting this to anything else than 1 does not work yet, but it is projected for future versions, and ground work has been done to make this happen. See also MESSAGEQUEUE_PREPARE

max_user_pp

Anonymous (anonymous@undisclosed.example.com) — 2017-02-14T21:55:53+00:00

This value is used to set the maximum per page for a listing of results. If there are more results, they will be listed in a subsequent page. Even though it seems to be indicate “maximum users per page” it is actually used to limit the results in a page in several other places.

merge_duplicates_delete_duplicate

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T21:45:44+00:00

This functionality has been suppressed in 3.0, but will come back as a plugin.

messagequeue_prepare

Anonymous (anonymous@undisclosed.example.com) — 2016-06-29T16:38:02+00:00

This option will initially mark all subscribers that need to receive the campaign as “todo” in the table and then start processing on all the “todo” entries. It may save a little on SQL time when you have a large amount of subscribers, as the query to search for subscribers is run fewer times.

message_envelope

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:47:56+00:00

message_sendstatus_inactivethreshold

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:30:00+00:00

message_sendstatus_sampletime

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:31:07+00:00

mimetypes_file

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T16:47:48+00:00

This is used for attaching FILESYSTEM_ATTACHMENTS

nostatscollection

Anonymous (anonymous@undisclosed.example.com) — 2015-04-28T11:00:50+00:00

Switching this on will stop the sending of a little report email about the statistics of the system. These statistics are only numbers on how many emails were sent and how long it took. It also reports the version of phpList used. These statistics help the developers to get an idea of the overall use of phpList. The report is sent to

noteditableconfig

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:49:15+00:00

notify_spam

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:57:26+00:00

When using USE_SPAM_BLOCK send an alert to the administrator when spam is blocked.

numattachments

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T23:58:26+00:00

This settings obviously requires ALLOW_ATTACHMENTS to be true. This does not restrict the total number of attachments that can be added to a campaign. It only restricts the amount of attachments that can be uploaded in one go. So the default 1 will be fine, because if you want to add more, you can add them one-by-one.

pageroot

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:50:09+00:00

pagetextcredits

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T23:59:13+00:00

password_change_timeframe

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:29:35+00:00

phpmailer

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:09:24+00:00

This setting is obsolete, because phpMailer is always used. It is kept though, because future versions may move away from phpMailer again, eg using SwiftMailer instead.

phpmailerblasthost

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:06:05+00:00

phpmailerblastport

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:06:54+00:00

phpmailerhost

Anonymous (anonymous@undisclosed.example.com) — 2013-09-25T19:53:37+00:00

Apart from the hostname, you can also specify the port and multiple hostnames See Multi SMTP

phpmailerport

Anonymous (anonymous@undisclosed.example.com) — 2013-09-16T19:08:56+00:00

phpmailersubscribehost

Anonymous (anonymous@undisclosed.example.com) — 2021-07-03T16:10:39+00:00

Apart from the hostname, you can also specify the port and multiple hostnames See Multi SMTP

phpmailertesthost

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:07:44+00:00

phpmailer_secure

Anonymous (anonymous@undisclosed.example.com) — 2016-09-17T15:57:47+00:00

version 3.2.6 introduced auto which will use AutoTLS If you have issues with connections, try setting it to false. This might be caused by invalid server certificates.

phpmailer_smtpoptions

Anonymous (anonymous@undisclosed.example.com) — 2016-12-14T08:01:57+00:00

See also https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting As an example, add this to your config.php file $phpmailer_smtpoptions = array( 'ssl' => array( 'verify_peer' => false, 'verify_peer_name' => false, 'allow_self_signed' => true ) ); which will avoid certificate checking on SSL connections. Quite useful for development systems with self-signed certificates.

phpmailer_smtppassword

Anonymous (anonymous@undisclosed.example.com) — 2013-09-16T19:04:45+00:00

phpmailer_smtpuser

Anonymous (anonymous@undisclosed.example.com) — 2013-09-16T19:02:49+00:00

plugins_disabled

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:51:03+00:00

plugin_rootdirs

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T16:38:33+00:00

The purpose of this setting is mostly for development, allowing developers to have plugins that are in a different location than that default location as set in PLUGIN_ROOTDIR See also Developing Plugins

preferencepage_show_private_lists

Anonymous (anonymous@undisclosed.example.com) — 2015-07-07T11:20:07+00:00

When false, the [LISTS] placeholder will only list public lists. When true, it will also list private lists.

processcampaigns_parallel

Anonymous (anonymous@undisclosed.example.com) — 2015-07-08T10:45:19+00:00

When there are more than one campaigns in the queue for sending, this option will split the total allowed batch across all campaigns and send them in equal amounts.

public_protocol

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:01:02+00:00

This is most useful when you run the phpList backend on HTTPS, but you want to keep the frontend on HTTP.

register

Anonymous (anonymous@undisclosed.example.com) — 2015-08-24T16:59:42+00:00

remote_url_refetch_timeout

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:28:24+00:00

require_login

Anonymous (anonymous@undisclosed.example.com) — 2017-10-02T16:15:14+00:00

Disables password login for the administrative interface (password-less logins are enabled).

resetstats_max

Anonymous (anonymous@undisclosed.example.com) — 2015-10-05T13:58:28+00:00

When a campaign has been sent to more subscribers than this value, the “reset statistics” checkbox will disappear. This is to avoid accidentally clearing all statistics from the system.

rfc_direct_delivery

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T21:25:56+00:00

This option will make an immediate delivery of the Request for Confirmation email to the destination address. As a result errors in delivery of this email, like “User not found” can be send back to the subscriber.

sendprocess_servername

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:19:03+00:00

sendtest_max

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:43:31+00:00

sendtest_throttle

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:43:45+00:00

This is the number of seconds delay required between two requests to use the send test functionality. See also SENDTEST_MAX

send_listadmin_copy

Anonymous (anonymous@undisclosed.example.com) — 2014-10-06T11:31:34+00:00

When the setting send_admin_copies is active, this option will find the email address of the list owner in the database, and include the list owner in the notification of subscribe, profile edit and unsubscribe. When this setting is enabled (true), the copies are ONLY sent to the list owner , and not to the

send_one_testmail

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:53:19+00:00

In previous versions this was set to false, or didn't exist. This caused all kinds of confusion on the test functionality sending out two messages, one in HTML and the other in Text. I still think it makes sense to keep this OFF to check that both versions come out fine, but to avoid confusion, it is now set to

send_queue_processing_report

Anonymous (anonymous@undisclosed.example.com) — 2020-07-23T19:08:26+00:00

When you have batch processing enabled, and run in small batches, and/or you run from commandline, you will want to switch this off, as you will receive loads of reports.

show_list_ofall_subscribers

Anonymous (anonymous@undisclosed.example.com) — 2017-07-19T11:32:11+00:00

From version 3.0.9 onwards. This flag enabled will show a list called “All subscribers” on the Subscriber Lists page that has all subscribers in the system as members. This is because there is often confusion about list membership counts when there are more subscribers than members of lists.

show_pqchoice

Anonymous (anonymous@undisclosed.example.com) — 2015-01-07T21:12:44+00:00

Setting this to true will active the option to process your queue with the phpList Hosted queue processing service At this moment, Jan 2015, this is experimental and you are invited to try it out. Major contributions will be rewarded (eg life long free account options).

show_unsubscribelink

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:03:16+00:00

silent_resubscribe

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:03:45+00:00

The default behaviour of phpList before version 3 was that a subscriber who signed up again, was added as if it was the first time they subscribed. So, the default for this option is true, which is the same as previous versions. With this option set to false, phpList will return an error on re-subscription.

smtp_timeout

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:49:36+00:00

Even if it fails phpList will try again the next time the queue is processed.

stacked_attribute_selection

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:26:40+00:00

This setting is obsolete. The attribute segmentation has been moved to a plugin.

stats_collection_address

Anonymous (anonymous@undisclosed.example.com) — 2015-04-28T11:00:11+00:00

This is the place where the statistics reports are sent when NOSTATSCOLLECTION is false

stats_interval

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:30:02+00:00

table_prefix

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:52:34+00:00

test

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T15:27:22+00:00

textemail_encoding

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:17:01+00:00

tinymcepath

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:05:01+00:00

tld_auth_list

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:05:23+00:00

tld_auth_md5

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:05:47+00:00

tld_refetch_timeout

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:06:16+00:00

tmpdir

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:53:26+00:00

translations_xml

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:06:54+00:00

ui

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:54:11+00:00

unblacklist_in_profile

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T19:06:30+00:00

The link is always on the history page of the subscriber. This setting will also add it to their main profile page.

unsubscribe_jumpoff

Anonymous (anonymous@undisclosed.example.com) — 2019-04-19T17:17:46+00:00

When this setting is disabled: Subscribers in order to complete their un-subscription will be directed to a page that displays a simple form for them to provide a reason on why they are leaving. The form only offers a free text area and it can be left blank. The user is unsubscribed when they click the

unsubscribe_requires_password

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:07:50+00:00

Using this option obviously requires the use of ASKFORPASSWORD

uploadimages_dir

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T17:30:04+00:00

The directory needs to be relative to the Webserver Root. The previous FCKIMAGES_DIR used to be relative to the phpList root (eg by default lists) This setting is used by the fckeditor plugin.

useck

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:08:23+00:00

usefck

Anonymous (anonymous@undisclosed.example.com) — 2013-08-21T00:08:46+00:00

userspage_max

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:22:45+00:00

usertable_prefix

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T22:55:05+00:00

user_wwwroot

Anonymous (anonymous@undisclosed.example.com) — 2023-07-27T12:33:37+00:00

This setting allows you to fix the location of the public (user) pages. This is particularly useful when in a proxying environment like Docker. Normally phpList will try to figure out where it is location from the server environment, but this setting will take precedence.

usetinymcemesg

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:30:47+00:00

usetinymcetempl

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:31:09+00:00

use_admin_details_for_messages

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:50:13+00:00

use_advanced_bouncehandling

Anonymous (anonymous@undisclosed.example.com) — 2015-05-21T15:50:15+00:00

use_amazonses

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:12:44+00:00

This value will be set to true when the AWS_ACCESSKEYID is set and curl functionality is available in PHP.

use_domain_throttle

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:33:49+00:00

When enabled, phpList will avoid sending too many emails to the same domain. The sizes can be set with DOMAIN_BATCH_SIZE and DOMAIN_BATCH_PERIOD See also domain throttling

use_editmessage

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T17:25:56+00:00

use_list_exclude

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:19:07+00:00

When enabled, the interface will allow the selection of lists whose members should NOT receive the campaign, even if they are member of the lists that are set to be targetted for the campaign.

use_local_spool

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:40:02+00:00

use_manual_text_part

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T17:31:54+00:00

If set to false, phpList will automatically create the text version from the HTML version.

use_minified_assets

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T15:15:11+00:00

use_pdf

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T15:24:40+00:00

use_personalised_remoteurls

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:45:53+00:00

use_precedence_header

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T20:04:17+00:00

There is a debate whether or not this should be used, and it seems different per major ISP. Amazon SES will not work when used, but Gmail likes it to be there. So, experiment and check your own results and then post them back here, or in the forums, so that everyone learns.

use_prepare

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:14:37+00:00

use_repetition

Anonymous (anonymous@undisclosed.example.com) — 2015-03-19T19:39:16+00:00

When using repetition phpList will create an exact copy of the campaign. As a result, this should only really be used when sending a URL or other dynamic content. Another good use is when using file system attachments. If you want phpList to send you some file from the server at a regular interval, the filesystem attachment will be refreshed at the moment of sending the (first) message.

use_spam_block

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:56:02+00:00

The spam and anti-spam world is an ongoing battle. Whenever anti-spammers find out a way to block spam, spammers will find a way to get around it. This option will add a little check on spammers, but is unlikely to be 100% in blocking spammers from signing up. Other efforts will have to go into creation of plugins that handle additional spam blocking.

variables

Anonymous (anonymous@undisclosed.example.com) — 2018-11-26T01:41:15+00:00

verbose

Anonymous (anonymous@undisclosed.example.com) — 2019-02-06T11:10:26+00:00

warn_about_php_settings

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T16:32:03+00:00

warn_savechanges

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T18:22:57+00:00

wordwrap_html

Anonymous (anonymous@undisclosed.example.com) — 2013-08-20T21:22:31+00:00

If you encounter strange line wrapping in your messages, you may want to try setting define('WORDWRAP_HTML',60);